Our dear friend, Christina McKinney, is back with another amazing plushie tutorial! If you were a fan of her adorable Pond Fishie Plushie, then you are going to love these adorable Marine Whales! This PDF pattern, comes in two sizes, so you can create an entire family of marine whales for your little tot at home! Now I'll hand the wheel over to Christina... Enjoy!
Howdy y’all! Sharing another fun tutorial with you today, inspired by the adorable Marine Too Collection by Dan Stiles. I actually grew up wanting to be a marine biologist, so ocean creatures have a special place in my heart. These sweet plushies come in two sizes and sew up really fast. They’d be a great nursery decor item, or a snuggly gift for a little one. You could even add a few ribbon loops around the edges and make it a taggie friend! Whatever options you may choose, I hope you have fun with it!
Tips: Use a 1/4in seam allowance throughout, unless otherwise stated. Read your pattern pieces carefully and assemble them along the indicated edges. (Refer to the piecing guide) Pinning will really help keep seams matched up, but I DO NOT recommend sewing over pins! Press all your pieces well before and during sewing.
1 fat quarter in main fabric print
1 fat quarter in contrast fabric (for bottom section)
1 fat quarter in second contrast print (for fins)
Printed pattern pieces - GET THE PATTERN HERE
Large - 13 1/2in wide by 10in tall
Small - 9in wide by 7in tall
Now lets get started!
With right sides together, sew each of your 2 sets of fins, leaving the top straight edges open.
Making sure not to cut your stitching, snip the curves to help the pieces lay flat when turned.
Using a chopstick or turning tool, flip the fins right side out and press.
Stuff each fin with a small amount of polyfil to desired firmness. Once stuffed, baste the straight edge shut.
Lay out your top and bottom pieces to determine placement for your fin.
With right sides together, match up the long edges of your main body piece and bottom piece. Your fin should be sandwiched in between the layers. Be sure to double check your fin placement so that you don’t end up stitching it in place backwards. Pin in place.
Repeat this process with the pieces for the opposite side and stitch in place. (Make sure to place your fins in the same place on both sides!)
Press your seam up toward the body.
Stitch this seam in place by top stitching about 1/8 from the edge of your seam. Use a contrasting thread for an extra detail. I usually extend my stitch length slightly for topstitching. Repeat this step for the opposite side as well.
If you plan to add the eye or any additional embellishments, you’ll want to do that now,
Lay your assembled pieces with right sides together. Be sure to flip the fins upward during this step to keep them out of the way while you sew. Pin around the edges, leaving a start and stop point along the bottom straight edge.
Stitch the pieces together, making sure to reinforce your start and stop points. Take your time sewing around the various curves.
It seems like a tedious step, but make sure to snip your curves before turning the piece right side out. It’s a little time consuming, but it makes all the difference in how it lays once it’s right side out. (Just be sure to not clip through your stitch line!)
Using a chopstick or turning tool, flip the whale right side out. Press one last time to get rid of the creases caused by turning. Stuff to desired firmness.
Close your bottom opening with a blind or ladder stitch.
And you’re done!
Ready to snuggle....or chew
Thank you Christina for this amazing free pattern! Be sure to share these cuties with a friend, heck we're thinking about having a girls sew night to sew a few up for ourselves!